Horizontal
polisher MAGIC-A
Horizontal
polisher for plastic material like plexiglass, methacrylate,
policarbonate etc. etc.
The polisher MAGIC-A allows you to work plates up to a maximum
thickness of 20 mm ( with a tilting side of 45°) thanks
to its tilting horizontal table it is possible to get bevels
or angles up to a max tilting of 60°.
It is possible, with a tilting of 60° (max available tilting),
to mill entirely a plate with a thickness of 12 mm.
The functioning of the machine is very easy; after tilting the
horizontal table to the right position, keep pressed the plate
to be polished against the working tables and at the same time
a motorised belt will feed the plate to the right speed against
the diamond milling cutter that makes the polishing.
TECHNICAL
DATA
• Dimensions: 650x500x330mm (including
manual pressure roller)
• Weight: 68 kg
• Milling capacity (plate's thickness): at 0° = 50mm;
at 45° = 20mm; at 60° = 12mm with possibility of using
all the intermediate degrees from 0° to 60°
• Motorised belt for feeding the plates with electrical
variable speed
• Diamond milling cutter with two cutting edges
• Speed of the milling cutter: 24000 rpm adjustable by
potentiometer
• Hole for chip suction 100mm
• Emergency button
• Voltage 220V - 0,55 kw
STANDARD
EQUIPMENT
• 1x Diamond milling cutter with two cutting
edges Ø60 mm
• Packing: cellophane
• Services spanners and instruction manual (complete with
electric diagram)
OPTIONALS
• Diamond milling cutter with two cutting
edges Ø60 mm
• Diamond milling cutter sharpening
|