Manual working center LUMIERE

Manual working center operating on 3 axes, with pneumatic lubrication, 1 pneumatic tracer point. Equipped with turning table at -90°/0°/+90° with goniometer for adjusting intermediate degrees. Axe Z with oil-pneumatic descent. Quick and easy adjustment of the tracer point. Equipped with variable speed spindle adjusted by inverter and potentiometer (max 12000rpm) with Threephase motor 0,75 KW. Working capacities 2800x200x200 mm. Equipped with 4 movable pneumatic clamps. Axis moving on linear guides. Specially dressed for working on aluminium, PVC, inox and steel.

TECHNICAL DATA
• Dimension: 3350x1450x1650 mm
• Weight: 900 kg
• Height of working table: 840 mm
• Pneumatic tilting of the table ( -90°/0°/90°)
• Adjustment of intermediates degrees
• X axe capacity, internal length: 2800mm, possibility to extend the length by external stop on the left side. Stop on the right side (Optional)
• Working capacities X: 2800, Y: 200, Z: 200
• Possibility to fit tools from mm 5/8/10 mm by changing the collet
• 4 double pressure pneumatic clamps (as per rules in force)
• Clamps pneumatically fitted on the tilting table
• Course stroke and blocking of X, Y axes by mechanical stops
• Working piece and tilting of the table by bi-manual system for complete safety
• Preset for forklift

STANDARD EQUIPMENT
• Tooling unit 8/8 mm
• Collet diam. 8 mm
• 4x pneumatic clamps
• 1x tracer point with 3 different diameters: 5/8/10mm
• 4x manual stops
• 3x standard copy templates
• Pneumatic spray mist lubrication
• Air filter
• Air gun
• 3x tanks to collect swarf
• Service spanners and instructions manual (c/w electric and pneumatic diagrams)

OPTIONAL
• Digital reading axes X,Y
• External stop on the right side
• Virgin Templates
• Emulsified cutting oil 20 Lt